Remington Model 700 Custom Shop 7mm Remington Magnum. Built at the Remington Custom Shop (Dakota Arms in Sturgis, South Dakota), serial number RR02587H has a 26-inch (27.5 inches with removable brake) Shilen heavy sporter barrel (1/8 twist, .765-inch diameter near muzzle before stepping down into threads) with skip-line fluting. The blue-printed Model 700 action carries a much-modified bolt with two plunger ejectors (redundant), long (M-16 style) extractor, body with skip-line fluting and a large knob. A left-side bolt release button and Timney Elite trigger have also been added. The bottom metal assembly is steel and all metal surfaces wear a Cerakote finish. STOCK: A McMillan Game Hunter stock with positive texture fields, deep pistol grip with palm swell, Monte Carlo comb with cheek rest, Pachmayr Decerator recoil pad, three sling swivel studs and camo finish also incorporates aluminum bedding pillars. OPTIC: A Swarovski Z8i 3.5-28×50 P scope with illuminated BRX-1 reticle and a BTF Ballistic Turret Flex elevation system is secured in Talley rings. ACCURACY: Included load information from Barnes Custom Center shows a .5 MOA 3-shot group with 168-grain LRX bullets at approximately 2,779 FPS. DIMENSIONS: Weight (with optic) is 11.2 pounds. Length-of-pull is 13.7 inches. CONDITION: The bore is outstanding. Metal and other surface finishes are approximately 99 percent. Optic (lens coatings, electronics) are absent issue. CASE: An SKB i Series case with custom-fitted interior and “Remington Custom Shop” on the outer lid completes the package. INCLUSIONS: See-through lens covers, auxiliary turret cap and four dials, Grovtec sling with swivels, sock, 200-year pin and the factory manual are present.